Composed by:Steve Cobb
The author’s initial sketch ultimately resulted in the great pattern explained here.
All images by Steve Cobb
Editor’s Note: Steve Cobb’s Santa Fly has actually been a preferred on this blog site for a couple of years now. We want to see YOUR variations on Instagram. Post images with hashtag #orvissantafly.
A number of years earlier, throughout the vacations, I scratched out a sketch of a fly that I believed may be an enjoyable tie for the Christmas season. The very first couple of Santas to come off the vise were so horrible that I believed the huge person may cross me off the “great list” completely. However the marabou kept flying, and after a while, I had a fly that I believed caught the spirit of old St. Nick.
He’s gone through a couple of modifications throughout the years, with a couple various products and a couple small modifications to make the tie a little simpler. So here’s the dish for my “Santa Fly.” There are great deals of actions, however none is especially hard, so do not be daunted. Forget conventional fly connecting: this dish begins at the eye and works its method rearward. Have a jolly great time connecting it … and do not stress over that naughty list.
Steve Cobb lives and fishes in Upstate New york city, on the northern edge of Adirondack Park. You can follow him on his blog site atQuietRaquette.com
Santa Claus Fly
Hook: Stainless-steel hook, size 1/0.
Thread # 1/nose: Red, 6/0.
Thread # 2: White, 6/0.
Beard Base: White deer hair.
Beard/hair: White marabou (long).
Head/face: Sheep’s wool.
Hat brim: White marabou.
Hat: Red turkey flats.
Eyes: 5X tippet and Little black glass beads.
Hair: White marabou.
Adhesive: Head cement.
Tools: Sewing needle
1. Start the red thread and develop a ball about the size of the hook eye. Whip-finish, cut the thread, and coat with head cement.
2. Connect the white thread, and pick a clump of white deer hair about the length of the hook indicate the eye.
3. Move hair as much as the tie-in point, simply behind the ball of red thread.
4. Spin the deer hair.
5. Work all the hair down half of the hook and connect it off.
6. Wrap back forward to the flared hair, and incorporate another clump on the bottom of the hook.
7. Connect off the hair, and press whatever tight towards the hook eye if needed.
8. Snip (and dispose of) the idea of a long white marabou plume. Wrap the thread back up to the flare and incorporate plume to the bottom of the hook.
9. Wrap back to midway point on hook, and cut off excess.
10. Select a little long, narrow clump of sheep’s wool. Bring completions together to form a ball, and connect it in to the top of the hook so the ball is even with the red thread.
11. Incorporate a little clump of white marabou (the much shorter, fluffier ones), one on each side.
12. Here’s how things need to look up until now …
13. Discover 2 marabou plumes with the longest ideas you can and snip them out. Holding the plume by the idea, strip off any loose flyaways from the stem of each.
14. Holding the very first plume by the stem, capture it midway with a couple loose thread covers, and after that pull the plume till simply the ideas are captured. Incorporate securely with a couple covers.
15. Take the 2nd plume and, holding it by the ideas, incorporate the shaft at the plume base with a couple more covers.
16. Get the complimentary end of both plumes and twist them somewhat. Stop twisting prior to they start to kink.
17. Wrap the twisted cable loosely around the wool ball.
18. Connect off the marabow. Do not stress over a couple of loose flyaways, as you can cut them later on.
19. Incorporate a great complete marabou plume, with the stem flattened, on the bottom of the hook.
20. Strip the fluff back from 2 red turkey flats and snip them off, leaving some shaft. Strip one side totally from each.
21. Cut both to match. The shaft side need to have to do with 3/4 of the hook in length (not consisting of the totally removed off part).
22. Incorporate the red plumes by the bases of their stems. If the tops flare far from each other a little, you can position a drop of glue at the extremely leading to hold them together.
23. Connect a lot of knots in the middle of a 12-inch piece of 5X tippet. Thread completions through a little glass bead. Heat the knots with a flame, and after that flatten them to the bead. Retouch the melted tippet with a black marker or paint. Cut one tag end off. Make 2 of these.
24. Thread the beaded tippet on a stitching needle. Pass the needle through the wool, beginning at each eye position and angling the tippet so it exits beside the hook on each side.
25. Let the beads avoid far from the wool, at first.
26. Pull each piece of tippet so the bead simply contacts the wool, and protect the tippets with 2 covers. Look for eye positioning and change if needed.
27. Wrap the thread back and cut the plumes and tippets. Protect them well with cement.
28. Incorporate another marabou plume by the stem.
29. Twist the marabou and cover it around and support to the red plume. Capture completions and incorporate.
30. Do 2 or 3 huge half drawbacks and protect them with cement.
31. Cut off all the loose ends and flyaways. Press the marabou from action 11 towards the hook eye and trim. Cut the beard plumes to match.
The ended up item: Ho, Ho, Ho!
